The REFLX LAB RANGE LUX METER
If you have been using film cameras for any length of time, you may have acquired a camera that lacks a light meter or a camera that lacks any sort of focus confirmation, perhaps even both in the same camera. There are a plethora of otherwise excellent rangefinder cameras out there that lack a light meter, or if they have an old Selenium meter, it’s most likely inoperable. There are some pretty good cameras that only offer zone focus guesstimation. I find that such cameras get less use than full-featured cameras, unless I am willing to put up with those deficiencies. Sometimes it’s a trade-off - choosing a 6x6 folding camera that’s really portable, yet having to carry a light meter and hope the best with the zone focus.
![]() |
| Well-packaged! |
![]() |
| Everything that's included. Just need a USB power source to charge the battery. |
Well, now you can do all those things with one small accessory. Thanks to the REFLX LAB Range Lux Meter, you can find the subject distance AND get a light meter reading with the same device! I was recently sent a Range Lux Meter to test, and to say that it is the answer to using all those less-featured cameras is an understatement.
![]() |
| My Minolta RF camera's built-in rangefinder patch is non-existent, so the Range Lux Meter is the perfect addition. |
What is it?
The REFLX LAB Range Lux Meter is a compact, metal-bodied unit that attaches to your cameras’s universal flash shoe. It can be a “cold” shoe without an X flash connection, or a standard “hot” shoe. By using two buttons at the rear of the unit, you can control the parameters for the light meter and measure the distance to the subject. The OLED display at the top of the meter provides instant feedback, and the rotating thumb wheel on the top adjusts the exposure parameters. A USB-C port on the right side allows you to charge the built-in battery of the device. All this in a unit that measures 43mm w x 35mm deep and 19mm high.
SPECIFICATIONS:
- Metering Angle: 30° with 7° center focus metering
- EV Range: 1 to 22
- Distance Measurement Range: 0-20m
- ISO Range: 8-6400
- Shutter Speed Range: 30 sec - 1/8000 sec
- Aperture Range: f/1 to f/32
- Weight: 34 grams
- Working Temperature: 14° - 140°F
- Battery: Built-in 280 amAh lithium battery, fully charge in 1.5 hr
- Material: Aluminum Alloy/Copper
This is possibly one of the most useful accessories I have seen. It checks all the boxes for an external meter/rangefinder with being bulky or difficult to use.
![]() |
| Very compact and well-laid out |
In Use
The REFLX LAB Range Lux Meter is easy to use once you read the manual and experiment with it to get familiar with the functions before you use it on a camera. Once you have the controls and adjustments figured out, it’s just a matter of pushing the left button for exposure settings and the right button for distance. Depending on the configuration of the hot/cold shoe on your camera, you may need to reattach the unit’s shoe mount to adjust for protuberances on the top of the camera.
Setting the meter for ISO, Aperture/Shutter speed (A/T), EV is accomplished with the two buttons on the rear of the unit. Real-time metering and one-button metering options are there. I prefer the one-time metering, where I have to short-press the button to meter each time.
![]() |
| The perfect addition to any medium format folder! |
It really makes sense to get familiar with the operation of this meter. Keep the small folded manual with you. Randomly pushing the buttons to get what you want will not be helpful.
The rotating button confused me a little, as it seemed to require more effort to rotate it than I expected. It controls your ISO, aperture or shutter setting, and just keep rotating it until you get your desired value.
Overall, this is the most useful accessory that I have used in quite a while. If you don’t need the rangefinder, you could purchase the cheaper REFLX LAB Light Meter for about $50. Having used that light meter, I find that this Range Lux Meter is superior in build, battery life, and options. If you have a number of vintage cameras that would benefit from the Range Lux Meter, it’s definitely going to make them more usable. For example, an Agfa Silette becomes much better with the Range Lux Meter attached. Just adjust your focus to match the meter’s distance, and the shutter speed to match that given by the light meter. So long as your camera has a cold/hot shoe, it becomes an essential accessory that will make your photography easier. If you camera lacks a shoe, you could just hold the meter in your hand.
![]() |
| This makes my Agfa Silette an even better camera |
![]() |
| Very nice combintion |
![]() |
| The Retina IIc lacks a meter |
The REFLX LAB Range Lux Meter sells for about $100, and I think it is definitely worth the expense. It does exactly as advertised, and looks to be a durable and precise instrument. It would make an ideal gift for a film photographer.
The people at REFLX LAB continue to impress me with their products. They are providing useful items at reasonable prices, and continue to be an asset to the film-using community.









2 comments:
Nice meter. But for my eyesight, the font size on the display was too tiny. I would need to don my reading glasses. Sigh....
I had not thought of that - but I have been wearing glasses since I was 10!
Post a Comment